How To Update Huawei T8830 Pro Via SPFT

How To Update Huawei T8830 Pro Via SPFT

By Unknown   13.49   Tidak ada komentar:

On this page we shared Tutorial Flashing Update Huawei T8830 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or virus. could lead to weaker performance of mobile phones, until Hardbrick. but as long as it is detected in the computer driver. you can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user data. but sometimes the damage is not quite in this way. You also need to update your Android phone.

• The following tools Huawei T8830

1. SP Flashtool Version 5 from here
2. Mtk tool and root droid from here
3. MT65xx usb driver from here
4. MT6577 driver usb vcom from here
5. Stock Rom Huawei T8830 from here

• Tutorial Update Huawei T8830

1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
2. Install the driver if not already installed
3. Download and extract your ROM package and find the scatter.txt file.
4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
7. After the red progress bar is complete, there will appear a purple progress bar.
8. Right after the purple progress bar is complete, a message will appear underneath it:
   “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
10. You can now safely disconnect your phone and turn it on. The process ends here.
 

• Complete Tutorial Flash Huawei T8830 : How to Using SP Flashtool

Read More

How To Update Huawei T8951 Via SPFT

How To Update Huawei T8951 Via SPFT

By Unknown   13.44   Tidak ada komentar:

On this page we shared Tutorial Flashing Update Huawei T8951 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or virus. could lead to weaker performance of mobile phones, until Hardbrick. but as long as it is detected in the computer driver. you can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user data. but sometimes the damage is not quite in this way. You also need to update your Android phone.

• The following tools Huawei T8951

1. SP Flashtool Version 5 from here
2. Mtk tool and root droid from here
3. MT65xx usb driver from here
4. MT6577 driver usb vcom from here
5. Stock Rom Huawei T8951 from here

• Tutorial Update Huawei T8951

1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
2. Install the driver if not already installed
3. Download and extract your ROM package and find the scatter.txt file.
4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
7. After the red progress bar is complete, there will appear a purple progress bar.
8. Right after the purple progress bar is complete, a message will appear underneath it:
   “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
10. You can now safely disconnect your phone and turn it on. The process ends here.
 

• Complete Tutorial Flash Huawei T8951 : How to Using SP Flashtool

Read More

How To Flash Huawei Ascend G700 Via SPFT

How To Flash Huawei Ascend G700 Via SPFT

By Unknown   13.38   Tidak ada komentar:

On this page we shared Tutorial Flashing Update Huawei Ascend G700 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or virus. could lead to weaker performance of mobile phones, until Hardbrick. but as long as it is detected in the computer driver. you can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user data. but sometimes the damage is not quite in this way. You also need to update your Android phone.

• The following tools Huawei Ascend G700

1. SP Flashtool Version 5 from here
2. Mtk tool and root droid from here
3. MT65xx usb driver from here
4. MT6577 driver usb vcom from here
5. Stock Rom Huawei Ascend G700 from here

• Tutorial Update Huawei Ascend G700

1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
2. Install the driver if not already installed
3. Download and extract your ROM package and find the scatter.txt file.
4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
7. After the red progress bar is complete, there will appear a purple progress bar.
8. Right after the purple progress bar is complete, a message will appear underneath it:
   “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
10. You can now safely disconnect your phone and turn it on. The process ends here.
 

• Complete Tutorial Flash Huawei Ascend G700 : How to Using SP Flashtool

Read More

How To Flash Update Huawei Honor 3X (G750-T00)

How To Flash Update Huawei Honor 3X (G750-T00)

By Unknown   13.56   Tidak ada komentar:

On this page we shared Tutorial Flashing Update Huawei Honor 3X (G750-T00). cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or virus. could lead to weaker performance of mobile phones, until Hardbrick. but as long as it is detected in the computer driver. you can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user data. but sometimes the damage is not quite in this way. You also need to update your Android phone.


Tool Update :

Download Link: Click here to download firmware 4.8.16 KitKat firmware for your Huawei Honor 3X (G750-T00).


How to Install Huawei Honor 3X (G750-T00)

1. Download the firmware package on your PC using the aforementioned link. 
2. Connect your Honor 3X to the PC using a USB cable in mass storage mode.
3. Create a new folder name “dload” in the microSD card.
4. Copy the firmware package you downloaded earlier to dload.
5. Disconnect the USB cable and turn off your phone (make sure it vibrates before you proceed to the next step).
6. Reboot into Recovery Mode by holding Volume Down + Volume Up + Power button for 5-6 seconds.
7. Your phone will automatically search for the update package and flash it. Wait for a few minutes until it gets completed.
8. Reboot the device and experience the new OS!

This firmware already contains Gapps (Google apps) so you don’t have to worry about flashing them again.

Read More

How To Flash Huawei Ascend Y511 Via SPFT

How To Flash Huawei Ascend Y511 Via SPFT

By Unknown   13.43   Tidak ada komentar:

On this page we shared Tutorial Flashing Update Huawei Ascend Y511 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or virus. could lead to weaker performance of mobile phones, until Hardbrick. but as long as it is detected in the computer driver. you can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user data. but sometimes the damage is not quite in this way. You also need to update your Android phone.

• The following tools Huawei Ascend Y511

1. SP Flashtool Version 5 from here
2. Mtk tool and root droid from here
3. MT65xx usb driver from here
4. MT6577 driver usb vcom from here
5. Stock Rom Huawei Ascend Y511 from here

• Tutorial Update Huawei Ascend Y511

1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
2. Install the driver if not already installed
3. Download and extract your ROM package and find the scatter.txt file.
4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
7. After the red progress bar is complete, there will appear a purple progress bar.
8. Right after the purple progress bar is complete, a message will appear underneath it:
   “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
10. You can now safely disconnect your phone and turn it on. The process ends here.
 

• Complete Tutorial Flash Huawei Ascend Y511 : How to Using SP Flashtool

Read More